 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC915LP4E v00.1009 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.5 - 2.7 GHz Features Input IP3: +28 dBm Low Input LO Drive: -2 to +4 dBm High LO to RF Isolation: 28 dB Low Conversion Loss: 8 dB Single Positive Supply: +5V @ 88 mA 24 Lead 4x4mm SMT Package: 16mm2 Typical Applications The HMC915LP4E is ideal for: * PCS / 3G Infrastructure * Base Stations & Repeaters * WiMAX & WiBro 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT * ISM & Fixed Wireless Functional Diagram General Description The HMC915LP4E is a high linearity, double-balanced converter that operates from 0.5 to 2.7 GHz and delivers a +28 dBm input IP3. The LO amplifier output and high dynamic range mixer input are positioned so that an external LO filter can be placed in series between them if necessary. The converter provides 28 dB of LO to RF isolation and is ideal for upconverter and downconverter applications. The IC operates from a single +5V supply consuming 88 mA and accepts LO drive levels of -2 to +4 dBm. The design requires no external baluns and supports IF frequencies between DC and 1 GHz. The HMC915LP4E is pin for pin compatible with the HMC552LP4E and the HMC215LP4E mixers with integrated LO amplifiers. Electrical Specifi cations, TA = +25C, LO = +2 dBm, Vcc = +5V, IF = 100 MHz* Parameter Frequency Range, RF, LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation IP3 (Input) 1 dB Compression (Input) LO Drive Input Level (Typical) Supply Current (Icc) 78 22 10 Min. Typ. 0.5 - 2.0 DC - 1.0 8 8.5 30 16 28 18 -2 to 4 88 110 78 25 12 11 Max. Min. Typ. 2.0 - 2.7 DC - 1.0 10 10.5 28 18 28 20 +2 to 6 88 110 13 Max. Units GHz GHz dB dB dB dB dBm dBm dBm mA *Unless otherwise noted, all measurements performed as a downconverter, with low side LO and confi gured as shown in application circuit. 9 - 398 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC915LP4E v00.1009 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.5 - 2.7 GHz Conversion Gain vs. Temperature, IF = 100 MHz 0 -5 -10 -15 -20 -25 -30 0.3 +25C +85C -40C Conversion Gain vs. Temperature, IF = 1 GHz 0 -5 -10 -15 -20 -25 -30 1.5 +25C +85C -40C CONVERSION GAIN (dB) CONVERSION GAIN (dB) 9 2.7 3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3 1.8 2.1 2.4 FREQUENCY (GHz) FREQUENCY (GHz) Isolation 0 Conversion Gain vs. LO Drive 0 -5 -10 -15 -20 -25 -30 0.3 LO= -4 dBm LO= -2 dBm LO= 0 dBm LO= +2 dBm LO= +4 dBm LO= +6 dBm -20 -30 RF to IF LO to RF LO to IF -40 -50 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3 CONVERSION GAIN (dB) -10 ISOLATION (dB) 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3 FREQUENCY (GHz) FREQUENCY (GHz) Return Loss 0 Upconverter Performance Input IP3 vs. LO Drive 40 35 -5 RETURN LOSS (dB) IP3 (dBm) 30 25 20 15 10 5 0 LO= -4 dBm LO= -2 dBm LO= 0 dBm LO= +2 dBm LO= +4 dBm LO= +6 dBm 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3 -10 -15 RF LO -20 -25 0 1 2 3 4 5 6 FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 399 MIXERS - SINGLE & DOUBLE BALANCED - SMT HMC915LP4E v00.1009 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.5 - 2.7 GHz Upconverter Performance Conversion Gain vs. LO Drive 0 -5 -10 -15 -20 -25 LO= -4 dBm LO= -2 dBm LO= 0 dBm LO= +2 dBm LO= +4 dBm LO= +6 dBm IF Bandwidth 0 -5 RESPONSE (dB) -10 -15 -20 -25 -30 -35 Conversion Gain, 0.8 GHz =LO < RF Conversion Gain, 2.25 GHz = LO > RF Return Loss 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT CONVERSION GAIN (dB) -30 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 FREQUENCY (GHz) FREQUENCY (GHz) Input IP3 vs. Temperature, IF = 100 MHz 50 Input IP3 vs. Temperature, IF = 1 GHz 50 40 40 IP3 (dBm) IP3 (dBm) 30 30 20 +25C +85C -40C 20 +25C +85C -40C 10 10 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3 0 1.5 1.8 2 2.2 2.5 2.7 3 FREQUENCY (GHz) FREQUENCY (GHz) Input IP3 vs. LO Drive, IF = 100 MHz 40 35 30 IP3 (dBm) Input IP2 vs. Temperature 100 90 80 IP2 (dBm) 70 60 50 40 30 1.5 +25C +85C -40C 25 20 15 10 5 0 0.3 LO= -4 dBm LO= -2 dBm LO= 0 dBm LO= +2 dBm LO= +4 dBm LO= +6 dBm 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3 1.8 2 2.2 2.5 2.7 3 FREQUENCY (GHz) FREQUENCY (GHz) 9 - 400 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC915LP4E v00.1009 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.5 - 2.7 GHz Input IP2 vs. LO Drive 90 80 INPUT P1dB (dBm) Input P1dB vs. Temperature 24 22 20 18 16 14 12 10 0.3 +25C +85C -40C 70 IP2 (dBm) 60 50 40 30 20 0.3 0.6 0.9 1.2 LO= -4 dBm LO= -2 dBm LO= 0 dBm LO= +2 dBm LO= +4 dBm LO= +6 dBm 9 2.4 2.7 1.5 1.8 2.1 2.4 2.7 3 0.6 0.9 1.2 1.5 1.8 2.1 FREQUENCY (GHz) FREQUENCY (GHz) Absolute Maximum Ratings Bias Voltage (Vdd) RF Power Input LO Power Input (Vcc = 5 Vdc) Channel Temperature Continuous Pdiss (T = 85C) (derate 8.4 mW/C above 85C) Thermal Resistance (junction to ground paddle) Storage Temperature Operating Temperature ESD Sensitivity (HBM) 5.5 Vdc +23 dBm +10 dBm up to 1 GHz +8 dBm from 1 - 4 GHz 150C 0.546 W 119 C/W -65 to +150C -55 to +85C Class 1C MxN Spurious @ IF Port nLO mRF 0 1 2 3 4 0 xx -4.67 -76.00 xx xx 1 -3.17 0.00 -71.34 xx xx 2 -23.34 -23.67 -79.84 xx xx 3 -30.34 -52.17 -71.84 -74.67 xx RF Freq. = 1.9 GHz @ -5 dBm LO Freq. = 1.8 GHz @ 0 dBm All values in dBc below the IF output power level. Typical Supply Current Vcc 4.5 5.0 5.5 Icc (mA) 67 mA 88 mA 117 mA Harmonics of LO nLO Spur @ RF Port LO Freq. (GHz) 1.0 1.4 1.8 2.2 1 32 28 29 33 35 34 2 40 19 16 18 23 20 3 27 25 30 27 34 41 4 40 30 42 44 41 44 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 2.6 3.0 LO = 4 dBm All values in dBc below input LO level measured at RF port. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 401 MIXERS - SINGLE & DOUBLE BALANCED - SMT HMC915LP4E v00.1009 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.5 - 2.7 GHz Outline Drawing 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number HMC915LP4E Package Body Material RoHS-compliant Low Stress Injection Molded Plastic Lead Finish 100% matte Sn MSL Rating MSL1 [2] Package Marking [1] H915 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 C 9 - 402 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC915LP4E v00.1009 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.5 - 2.7 GHz Pin Descriptions Pin Number Function Description Interface Schematic 1 MIX LO This pin is DC coupled and matched to 50 Ohms. 2, 6 - 9, 11 - 17, 19 - 24 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT 9 - 403 3 BIAS Power supply and output for the LO amplifier. Three external bypass capacitors are recommended for optimum performance, as illustrated in the application circuit. 4 GND Backside of package has exposed metal ground paddle that must also be connected to ground. 5 LO This pin is DC coupled and matched to 50 Ohms. An off chip DC blocking capacitor is required. 10 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 18 mA of current or die non-function and possible die failure will result. 18 RF This pin is DC coupled and matched to 50 Ohms. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC915LP4E v00.1009 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.5 - 2.7 GHz Application Circuit 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT Recommended Components Values C3 C4 C1, C2, C5 L1 R1 1000 pF 2.2 F 100 pF 24 nH 1.8 Ohm 9 - 404 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC915LP4E v00.1009 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.5 - 2.7 GHz Evaluation PCB 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT 9 - 405 List of Materials for Evaluation PCB 115820 [1] Item J1 - J3 J4, J5 C1, C2, C5 C3 C4 L1 R1 U1 PCB [2] Description PCB Mount SMA RF Connector DC Pin 100 pF Chip Capacitor, 0402 Pkg. 1000 pF Chip Capacitor, 0603 Pkg. 2.2 F Capacitor, Tantalum 24 nH Chip Inductor, 0603 Pkg. 1.8 Ohm Resistor, 1206 1/4 Watt Pkg. HMC915LP4E 113417 Evaluation PCB The circuit board used should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com |
Price & Availability of HMC915LP4E
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |